SpliceCom 5330 Phone Module
The 5330 Phone Module is available in two
variants, providing connectivity for up
to thirty (SpliceCom 5330)
analogue devices. These can be
traditional analogue (POTS) telephones,
fax machines or modems. Typically used
to connect SpliceCom's PCS 10 and PCS 5
system phones, the deployment of
SpliceCom 5330 Phone Module
provides un-paralleled investment
protection where standard analogue
phones are already utilised, whilst
allowing the overall capital cost of a
maximiser system to be minimised.
These phones can then be further
energised by using them in conjunction
with the Proactive Communication Station
(PCS) 50 application, which runs on a
desktop or laptop PC as a partner to the
analogue phone, independent of the
operating system - Windows, Mac OS X and
Linux are all supported. Connectivity
between SpliceCom 5330 Phone Module and their local
SpliceCom 5100 Call Server is achieved
over a private LAN network, for separate
voice and data networking, or overlaid
on the existing company LAN with Quality
of Service (QoS) support, if full voice
& data convergence is a requirement.
This connectivity enables the SpliceCom
5330 Phone Module
to be located anywhere where they can be
linked to a 5100 Call Server - either
locally via the LAN or remotely
across an IP WAN infrastructure. A
10/100 Mbps LAN port is provided at the
front of the 5330 Phone Module to
meet this need. All analogue extension
interfaces are also positioned at the
front of the SpliceCom 5330 Phone Module.
This architecture allows installation
costs to be drastically reduced as a
single Category 5 cable (or better)
running from a 5100 Call Server to a
5330 Phone Module replaces up to 30
cables in a traditional PBX
installation. |
