SpliceCom 5315 Phone Module.
The 5315 Phone Module is available in two variants,
providing connectivity for up to fifteen (Splicecom
5315) analogue devices. These can be traditional
analogue (POTS) telephones, fax machines or modems.
Typically used to connect SpliceCom's PCS 10 and
PCS 5 system phones, the deployment of SpliceCom
5315 Phone Module provides un-paralleled investment
protection where standard analogue phones are already
utilised, whilst allowing the overall capital cost
of a maximiser system to be minimised.These phones
can then be further energised by using them in conjunction
with the Proactive Communication Station (PCS) 50
application, which runs on a desktop or laptop PC
as a partner to the analogue phone, independent
of the operating system - Windows, Mac OS X and
Linux are all supported. Connectivity between the
SpliceCom 5315 Phone Modules and their local
SpliceCom 5100 Call Server is achieved over a private
LAN network, for separate voice and data networking,
or overlaid on the existing company LAN with Quality
of Service (QoS) support, if full voice & data convergence
is a requirement.
This connectivity enables Phone Modules to be
located anywhere where they can be linked to a 5100
Call Server - either locally via the LAN or remotely
across an IP WAN infrastructure. A 10/100 Mbps LAN
port is provided at the front of the 5315 Phone
Module to meet this need. All analogue extension
interfaces are also positioned at the front of the
5315 Phone Module. This architecture allows installation
costs to be drastically reduced as a single Category
5 cable (or better) running from a 5100 Call Server
to a SpliceCom 5315 Phone Module replaces up to
30 cables in a traditional PBX installation.
|
